A: We have different certificates for company and our products. 
1). Company Certificates: SGS, ISO, and other certificates for exporting, such as ICQ.
2). Products Certificates: CE, IWFA, Quality Management System Certificates.

A: Our Payment term is T/T, L/C, western union or paypal.

A: 200,000 meters/day. We have 5 production lines for the film and can assure you of a fast delivery for films.

A: 1),Small Quantity less than 10 rolls, we can delivery the goods within 5 working days. cause most of those films are available directly from our stock.
    2), Big Quantity, we can delivery the goods within 10-20 working days.

A: Window Tint is applied to glass that has been sprayed with a special liquid which allows the tint to be moved around and positioned properly. Once in place, the tint is squeegeed extensively to remove as much of this moisture as possible but some is always left behind. Over a period of between 5-7 days this will evaporate as the tint cures to the glass.

A: Bubbling usually occurs wih a poor quality tint that lacks a strong adhesive and poor quality installation.

A: This film should be used with the dry application method after the surface has been cleaned and no oils, grease, wax, or other contaminants are on the surface.

A: Applying specialist vehicle wrapping film to your vehicle will not damage your paintwork. However If you already have stone chips, abrasions or rust patches on your paintwork it's important to remember that when the vinyl is removed it may pull loose paint off with it.

A:Window Film has been installed to the glass internally.

A:When tinting the window film, it usually turns blurry, cloudy, and displaying some different colors right after the installation. However, these conditions will remain only 3 days in summer and a week in winter only after the water drying process for tinting. Therefore, the window should be avoided turning up and down or avoided being touched. Do not directly scratch the tinted window with sharp objects. The film surface has a hard coating, but nails or other sharp objects can make scratches. Furthermore, do not put tape on tinted windows.

A:NEW VISION has had a long history in the R&D and the Production of the Widnow Film. Moreover, we are the excellent company which holds the high optical technology like lenses and the camera body development. New Vision has been considering we has a potential to produce the world top class heat rejection window film with our own unique technology, since we hold the quality production process and R&D. So, we determined to open our door to the Window Film Business.

A:① It is Non-Metallic Use Type, so it is categorized in the electro magnetic wave penetrable Window Film.
→ It has no interruption to the communication by electronic devices, such as Smart TAG, Mobile phone or Car Navigation.
② The Wave Length Control Technology (FX applied the optical design technology and the thin-film formation technology with the new developed materials to design the construction of the multi-layer typed-film.) 
→ Therefore, the electro magnetic wave can be penetrated with the high visible light transmission.
→ Therefore, our window films are completed with the wide range of product line-up.
③ With more strength in the heat-reflection than in heat-absorption, the car interior will not be filled up with heat.
④ FX window film has the highest TSER (Total Solar Energy Rejection) ratio in the electro magnetic wave penetrable heat rejection window film category.

A:Temperature should be between 40 and 98 degrees Fahrenheit for best results.

A:No. I tried this and the soapy bubbles were impossible to move to the edge and the slimey residue was making the tint slide everywhere.

A:Yes, do it the same way as described in this article. For some windows you may have to take off the interior panels to get the best results.